Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Nissan X-Trail

Model: Nissan X Trail MK 2, T31 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Warning light – error code

See other generations:
Video tutorial

In this video tutorial, see how to reset the maintenance light on a Nissan X-Trail by following simple steps: the first thing to do is perform maintenance on the vehicle, such as changing the engine oil and filter. After completing the DIY service, get in the car and engage the handbrake.

Turn on the ignition, keeping the engine off, then press the accelerator pedal 5 times, trying to complete the operation within 5 seconds. Now wait for 7 seconds, then hold the accelerator pedal down for about 14 seconds; at this point, the service light should start flashing.

Now remove your foot from the accelerator and turn off the car, then restart to check if the service light has disappeared.


Updated on 4 July 2026 by ScegliAuto


Related tutorials

Nissan X Trail (2007-2014 / MK 2, T31) .. In today's video, we will see how to reset the service light on a Nissan X Trail, second generation model produced from 2007 to 2014... …
Nissan X Trail (2014-2023 / MK 3, T32) .. intervals on some vehicles, such as the Nissan X Trail, it is necessary to reset the service light. This reset procedure is quite simple and should be.. …
Nissan X Trail (2007-2014 / MK 2, T31) .. learn how to reset the service on a Nissan X-Trail MK2: close all the doors and turn on the instrument panel, then press and hold the button located.. …

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos