Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Right CV Axle on a Nissan Altima

Model: Nissan Altima L34 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026

See other generations:
Video tutorial

In this video, we show you how to replace the right CV axle on a Nissan Altima. The procedure is the same for earlier models of the same car. To start, lift the car on a jack or jack stands and remove the right wheel.

Next, using two 21 mm wrenches, remove the bracket as shown in the video. Once you loosen the joint at the center of the hub, begin tapping with the handle of a hammer to detach it from the axle.

Once detached, pull it towards you to access the axle lock and begin disassembling it. From this point on, carefully follow the operations shown in the video.


Updated on 27 July 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Shocks on a Nissan Altima?
How to Replace the Rear Shocks on a Nissan Altima?
Nissan Altima (2002-2006 / L31) To replace the rear shocks on a Nissan Altima, lift the car using a jack or lift so that the wheels are off the ground. Once lifted, you can loosen t…
Where to Find the Fuse Box on a 1998 Nissan Altima
Where to Find the Fuse Box on a 1998 Nissan Altima
Nissan Altima (1998-2001 / L30) In this mini guide for your 1998 Nissan Altima, you will discover where the fuse box is located. First, enter the vehicle from the driver's side. Mak…
Where to Find the Fuse Box of the 2004 Nissan Altima
Where to Find the Fuse Box of the 2004 Nissan Altima
Nissan Altima (2002-2006 / L31) If you haven't been able to locate the box that contains all the various fuses in your 2004 Nissan Altima, don't worry because below we will provide …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos