Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Outer Door Handle of the Front Door of the Nissan Almera

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Handle

These simple steps will guide you on how to remove and replace the outer door handle of the front door of the Nissan Almera. First, open the driver's side front door and start by removing the door panel by unscrewing all the fastening screws and disconnecting the electric connector of the window switch; then unscrew the internal screws of the opening handle, disconnecting the cable to remove it from the outside, as shown in the video. At this point, carry out the repair or replacement of the handle, refitting it onto the door.

Posted on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Door Panel on a Nissan Almera
Removing the Door Panel on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) In this video, you will see how to replace the door panel on a Nissan Almera. First, open the door and remove the screws located along the edge of th…
How to Replace the Right Door on a Nissan Almera
How to Replace the Right Door on a Nissan Almera
Nissan Almera (2000-2008 / N16, MK 2) To remove the door panel of a Nissan Almera, follow these instructions. Remove the handle cover along with the switch panel, then the frame of the op…
Removing the Switch Panel from a Nissan Almera Door
Nissan Almera (2000-2008 / N16, MK 2) Is the switch panel on your Nissan Almera faulty and needs replacing? Here's how to remove it from the top of the panel. Using a plastic or metal lev…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos