Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Right Door on a Nissan Almera

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Door trim panel

To remove the door panel of a Nissan Almera, follow these instructions. Remove the handle cover along with the switch panel, then the frame of the opening lever. Unscrew the screws located in the space of the upper door opening lever and the screws present in the handle. Unscrew the remaining screws on the door panel and detach the securing clips. Pull the panel towards you and disconnect it from the door (disconnect the power wiring and the opening cable if present). Disconnect the terminals of the window switch before removing the panel.

Updated on 21 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Almera (2000-2008 / N16, MK 2) In this video, you will see how to replace the door panel on a Nissan Almera. First, open the door and remove the screws located along the edge of th…
Nissan Almera (2000-2008 / N16, MK 2) Is the switch panel on your Nissan Almera faulty and needs replacing? Here's how to remove it from the top of the panel. Using a plastic or metal lev…
Nissan Almera (2000-2008 / N16, MK 2) In this video tutorial, you will see the steps necessary to remove and replace the antenna on the Nissan Almera. First, get inside the vehicle and st…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos