Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Turn Signal Bulb on a 2020 Nissan Altima

Model: Nissan Altima L34 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tail light bulb

See other generations:
Video tutorial

If one of the rear turn signals (or both) on your 2020 Nissan Altima is not working, you need to replace the bulb to avoid any legal or safety issues. First, turn off the car completely and go to the rear.

Fully lift the trunk lid and remove all screws located near the headlight of the bulb to be replaced. Once done, move back outside and pull the entire headlight towards you. Unscrew the non-working bulb and replace it with a new one.


Updated on 31 July 2026 by ScegliAuto


Related tutorials

How to Replace the Tail Light Bulbs on the Nissan Altima
How to Replace the Tail Light Bulbs on the Nissan Altima
Nissan Altima (2007-2012 / L32) Here is the guide on how to disassemble and replace the tail light and its bulbs on the Nissan Altima. First, open the trunk lid and start removing t…
How to Replace the Rear Headlight Bulb on a Nissan Altima
How to Replace the Rear Headlight Bulb on a Nissan Altima
Nissan Altima (2018-2026 / L34) If the rear headlight bulb on your Nissan Altima (latest model) has suddenly stopped working and you want to learn how to replace it quickly and corr…
How to replace the headlight bulb of the 2022 Nissan Altima
How to replace the headlight bulb of the 2022 Nissan Altima
Nissan Altima (2018-2026 / L34) In the following mini guide, we will describe all the steps you need to follow to replace the front headlight bulb of your Nissan Altima (year 2022) …

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos