Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Exhaust of the Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010
Part: Exhaust muffler

In this tutorial, you will learn how to remove and replace the exhaust of the Nissan Micra, following the instructions below. First, raise the vehicle and spray some penetrating fluid on the nuts of the exhaust manifold; then, undo them to remove the manifold from the mounting brackets, as shown in the video. Next, disconnect the exhaust from the engine using a socket spanner with an extension; remove both the catalyst along with the manifold and the tailpipe, applying the reverse procedure for reassembly!

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Nissan Micra
How to Replace the Exhaust on a Nissan Micra
Nissan Micra (2002-2010 / K12) To replace the exhaust on a Nissan Micra, first lift the car and use WD-40 spray and a wire brush to clean the bolt of the silencer clamp before remo…
Where to Find the Fuse Box of the 2016 Nissan Micra
Where to Find the Fuse Box of the 2016 Nissan Micra
Nissan Micra (2010-2017 / K13) To locate the fuse box of your 2016 Nissan Micra, carefully follow these instructions and put them into practice. First, switch off the car and ensur…
How to Remove the Front Bumper of a Nissan Micra
How to Remove the Front Bumper of a Nissan Micra
Nissan Micra (1992-2002 / K11) Before you start, open the front bonnet of your Nissan Micra. Next, unscrew and remove the bolts securing the front lights to the frame. Then, discon…

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos