Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front stabiliser links on a Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010

The first steps to replace the front stabiliser links on a Nissan Micra are to tighten the wheels, loosen the bolts, and lift the car. Remove the bolts and take off the wheels. The second step is to unscrew the fastening elements connecting the stabiliser link to the shock absorber strut and also unscrew the bolts connecting the link to the bar. Remove the worn link and install a new one. After completing all the steps, reassemble everything as shown in the video. This operation is the same for all four wheels and should be carried out by professionals.

Updated on 31 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install Roof Bars on the Nissan Micra
Nissan Micra (2017-2024 / K14) How do you install roof bars on a Nissan Micra? Let's look at the installation of the parts. Fit the roof bar kit on vehicles without rails, using ba…
Fitting Original Ski Racks on a Nissan Micra
Nissan Micra (2017-2024 / K14) In this video, see how to fit original ski racks on a Nissan Micra K14 version. This is an original accessory, which you can purchase from your Nissa…
Replacement of Rear Wiper Blade for Nissan Micra
Replacement of Rear Wiper Blade for Nissan Micra
Nissan Micra (2002-2010 / K12) Below are the main steps to remove and replace the rear wiper blade of the Nissan Micra. First, move to the rear of the vehicle and begin to lift the…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos