Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Anti-Roll Bar Link

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Anti-roll bar

See other generations:
Video tutorial

If you hear a noise similar to a knock from the wheel while driving over uneven surfaces, it is likely that the spherical joints of the links have failed. These are the rods that connect the anti-roll bar to the shock absorbers.

To replace the link, lift the vehicle on a hydraulic lift, remove the front wheel, and proceed to unscrew the nuts that secure the link ends to the shock absorber bracket and the anti-roll bar. Insert the spanner on the nut and turn the link end with the hex key. Then reverse the process to install the new one.


Updated on 17 February 2026 by ScegliAuto


Related tutorials

How to replace the front stabiliser links on a Nissan Micra
How to replace the front stabiliser links on a Nissan Micra
Nissan Micra (2002-2010 / K12) The first steps to replace the front stabiliser links on a Nissan Micra are to tighten the wheels, loosen the bolts, and lift the car. Remove the bol…
How to Replace the Rear Light Bulb on the Nissan Micra III
How to Replace the Rear Light Bulb on the Nissan Micra III
Nissan Micra (2010-2017 / K13) In this video, see how to change the rear light bulb on the Nissan Micra III: open the boot and use a spanner to remove the two bolts on the outer si…
How do you replace a headlight bulb in the Nissan Micra k12?
How do you replace a headlight bulb in the Nissan Micra k12?
Nissan Micra (2002-2010 / K12) The replacement of a front headlight bulb of the Nissan Micra k12 does not necessarily require going to a workshop, we can do it ourselves and in a r…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos