Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on the Nissan Micra III

Model: Nissan Micra K13 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Light bulb

See other generations:
Video tutorial

In this video, see how to change the rear light bulb on the Nissan Micra III: open the boot and use a spanner to remove the two bolts on the outer side of the light unit. This will allow you to take it out of its housing by disconnecting the electrical connector.

Remove the rubber cover and lever the bar that holds the bulbs. Take out the bulb you wish to change by turning it a quarter turn, place the new one in - without touching the bulb with bare hands - and then refit the bar and the rubber seal.

Reconnect the electrical connector and secure the two bolts for the light unit again. Job done.


Updated on 15 September 2026 by ScegliAuto


Related tutorials

Remove the Rear Light from the Nissan Micra
Remove the Rear Light from the Nissan Micra
Nissan Micra (2010-2017 / K13) Is the rear light damaged? Let's look at removing the rear light from a Nissan Micra. Open the boot and lift it. Use a screwdriver to remove the secu…
How to replace the rear taillight bulb of a Nissan Micra III
How to replace the rear taillight bulb of a Nissan Micra III
Nissan Micra (2010-2017 / K13) In this video we will see how to replace the rear bulb of a Nissan Micra III: we will have to open the rear hood and then unscrew the two screws that…
How to disassemble the rear light of the Nissan Micra
How to disassemble the rear light of the Nissan Micra
Nissan Micra (2002-2010 / K12) In this guide, we will see the step-by-step instructions on how to disassemble and replace the rear light and its bulbs of the Nissan Micra. First, l…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos