Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Climate Control Bulbs in the Nissan Micra K12

Model: Nissan Micra K12 - Years 2002-2010
Part: A/C controls

In this video, learn how to replace the bulbs that illuminate the climate control in a Nissan Micra K12. Remove the radio from the console using the appropriate tools, disconnect the recirculation control knob, unscrew the two cross-head screws on the edge, and take off the panel. Rotate the three main controls to the left and pull off the knobs. Use a pointed lever to release the two upper plastic clips and the two lower ones that secure the black trim and remove it. You can access the two yellow bulbs, which you will pull out instead of twisting. Replace them with two new T5 bulbs, test their operation, and reassemble the components in reverse order of disassembly.

Updated on 12 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Location of the fuse box of the Nissan Micra
Location of the fuse box of the Nissan Micra
Nissan Micra (2002-2010 / K12) The Nissan Micra model K12 has two fuse boxes. The first fuse box is located inside the engine compartment, specifically on the bottom left next to t…
How to Change the Position Light Bulb on the Nissan Micra K12?
How to Change the Position Light Bulb on the Nissan Micra K12?
Nissan Micra (2002-2010 / K12) Position lights are part of the eight mandatory lights present on every car. When one of them blows, it is important to know how to change it quickly…
How to Replace the Key Battery on the Nissan Micra K12
How to Replace the Key Battery on the Nissan Micra K12
Nissan Micra (2002-2010 / K12) With the instructions in this new mini guide, you will be able to replace the key battery of your Nissan Micra K12 (2002-2010) with ease. First, obta…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos