Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the ECU of the Nissan Navara D40

Model: Nissan Navara D40 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to reset the ECU of the Nissan Navara D40. To reset the ECU, start the ignition by turning the key to ON, then wait for 3 seconds. After waiting, press the accelerator pedal 5 times.

At this point, wait for 7 seconds, then press and hold the accelerator pedal for 10 seconds. Release the accelerator pedal and wait for the engine warning light to flash.

Now wait for two minutes, turn off the ignition, wait another two minutes, and then start the ignition again.


Updated on 21 September 2026 by ScegliAuto


Related tutorials

Nissan Navara (2005-2015 / D40) This procedure is specific to the Nissan Navara D40 with a 3.0 diesel engine (YD3.0) and the type of instrument panel shown in the video. For Navara …
Nissan Navara (2005-2015 / D40) In this video, learn how to reset the low oil level indicator on a Nissan Navara D40. This message appears after maintenance or an oil change and inc…
Nissan Navara (2005-2015 / D40) Let's see how to reset the service light on a Nissan Navara D40: turn on the instrument panel without starting the engine. The display will show the …

Other guides you may be interested in

How to Open the Fuel Flap on a Volkswagen Tiguan?

To open the fuel flap on a Volkswagen Tiguan, first unlock the car using the appropriate button on the remote. This will open the car and unlock the mechanism that controls the fuel flap. At this point, apply light pressure to the left side of the flap to open it and access the cap underneath. Once this is unscrewed, you can refuel and then close everything.

Watch the video!


by ScegliAuto

More videos