Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Nissan Qashqai

Model: Nissan Qashqai J10 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light bulb

See other generations:
Video tutorial

First, open and lift the rear boot lid to access the bolts securing the entire light unit. To completely remove it, simply pull it towards you to disengage the safety clips, then disconnect the connector at the back.

Now, remove the hard plastic protective cover to access the individual bulbs and replace any that are no longer functioning. Then retrace the steps in reverse for reassembling the various components.


Updated on 24 February 2026 by ScegliAuto


Related tutorials

How to change the rear headlight bulb of a Nissan Qashqai
How to change the rear headlight bulb of a Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) To access and replace the bulb of a rear headlight of a Nissan Qashqai 2 car, you will need to open the vehicle's trunk and remove the entire headlig…
How to replace the rear headlight bulb of the Nissan Qashqai
How to replace the rear headlight bulb of the Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today we will explain how to replace the left and right rear headlight bulb of the Nissan Qashqai on your own. To perform this simple operation, we m…
How to replace the rear headlight bulb of the 2016 Nissan Qashqai
How to replace the rear headlight bulb of the 2016 Nissan Qashqai
Nissan Qashqai (2014-2022 / J11) Today we will explain how to replace the rear headlight bulb on a 2016 Nissan Qashqai. To perform this operation, we need to open the trunk of the ca…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos