Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the 2018 Nissan Navara?

Model: Nissan Navara D23 - Years 2014-2024
Part: Service warning light

The visible sequence in the video here, was performed in a Nissan Frontier, but it can easily be replicated with the specified vehicle. It is implied that the reset explained here, must be done after having effectively carried out the work required by the manufacturer, otherwise the risk of causing serious damage to the engine is high. The indicator light is reset by turning on the instrument panel, pressing the accelerator pedal five times and holding it down for ten seconds on the fifth press. The aforementioned light will flash briefly and then turn off. Job done.

Posted on 2 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on a Nissan Navara
How to Reset the Service on a Nissan Navara
Nissan Navara (2014-2024 / D23) To reset the service on the Nissan Navara, after completing the required services, get in the vehicle, close the doors, and turn on the ignition with…
How to Reset the Service Light on a Nissan Navara D40
How to Reset the Service Light on a Nissan Navara D40
Nissan Navara (2005-2015 / D40) This video shows the procedure to reset the maintenance light on a Nissan Navara D40. This procedure is very simple and quick, taking less than a min…
How to Reset the Service Light on the Nissan Navara?
How to Reset the Service Light on the Nissan Navara?
Nissan Navara (2014-2024 / D23) From the instrument cluster of the Nissan Navara, you can clear the Service light that appears by inserting the ignition key into the corresponding s…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos