Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Underseat Compartment on a Niu N1

Model: Niu N1
Part:

Video tutorial

With the scooter turned off, lift the seat and disconnect the charging connector of the electric scooter. Unscrew the four screws located in the rear underseat area, as clearly shown in the video.

Similarly, unscrew the two internal screws located at the front. Done! Yes, after performing these simple steps, you can remove the underseat compartment, taking care not to damage any parts and disconnecting the underlying cables.

Once you reach this point, you can also tighten the nuts beneath the charging socket that may have come loose. Proceed in reverse for reassembly.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Brake Pads on Niu NQi
How to Replace the Rear Brake Pads on Niu NQi
Nqi Today we will see the instructions for removing and replacing the rear brake pads on the Niu NQi scooter. First, place it on the centre stand and sta…
How do you install the rear rack on the Niu N-Series?
How do you install the rear rack on the Niu N-Series?
N Series In order to install the rear rack on the Niu N-Series, you need to open the underseat compartment by lifting the seat itself and accessing its lower …
How to Replace the Seat on the Peugeot Citystar 125?
How to Replace the Seat on the Peugeot Citystar 125?
Citystar 125 Remove the seat of the Peugeot Citystar 125 by also taking out the corresponding under-seat compartment. Lift the padded part of the seat to access t…

How to Change the Engine Oil in a Kymco X-Town 300 Scooter

In this tutorial, you will learn how to change the engine oil in a Kymco X-Town 300 scooter, a very simple and quick operation. Before proceeding, wait for the engine to be completely cold to work safely. Start by opening the filler cap, then position a container underneath the scooter and, using a 17mm socket spanner, unscrew the drain bolt. Once all the oil has completely drained from the system, clean the filter of any residue, tighten the bolt, and insert the required amount of oil through the upper hole.

Watch the video!


by ScegliAuto

More videos