Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Fuses and OBD Socket on the Opel Vectra

Model: Vauxhall Vectra Vectra B, MK 2 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Fuse box

See other generations:
Video tutorial

This guide will show you where to find the fuse boxes and the OBD socket on the Opel Vectra, in simple steps. First, open the driver's side front door and start removing the plastic cover located on the left side next to the steering wheel; at the back, you will find the internal fuse box, as shown in the video.

At this point, remove the plastic cover located under the handbrake to access the OBD diagnostic socket; you will find another fuse box in the engine bay, as well as the main fuse and relay box.


Updated on 20 October 2026 by ScegliAuto


Related tutorials

Where are the Fuses Located on an Opel Vectra?
Where are the Fuses Located on an Opel Vectra?
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) The fuses on an Opel Vectra are located inside the designated fuse boxes present in the vehicle: there are two in this type of vehicle. The first is …
Where are the fuses located in the Opel Vectra?
Where are the fuses located in the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The fuse boxes of the Opel Vectra serve to contain the fuses that regulate the operation of the devices installed on the vehicle: in this type of car…
Where are the Fuses Located on the Opel Vectra?
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) The fuses on the Opel Vectra are located inside the designated fuse boxes within the vehicle: this model has three boxes containing the fuses. The fi…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos