Do it yourself
Frequently asked questions about cars and motorcycles

Intake manifold gasket replacement

Model: Vauxhall Vectra MK 2, Vectra B - Years 1995-2002
Part: Engine

It is advisable to carry out this maintenance only if you have good knowledge of mechanics as the disassembly of the intake manifold is not a real do-it-yourself operation. In any case, if you want to try your hand, you must certainly arm yourself with patience since to get to the fixing pins of the collector flange to the engine you have to remove a lot of stuff. First remove the air filter container, disconnect the battery and continue by disconnecting the sockets of the various sensors (mass air flow sensor, throttle body, ...), the fuel supply pipes and the accelerator control. Then proceed with disassembling the injection system by removing the injector rail and the injectors themselves: they are stuck and must be pulled hard to remove them. Finally, unscrew all the fixing pins of the manifold to be able to remove it.


Posted on 12 July 2023 by ScegliAuto



Disassembly and cleaning of the EGR valve
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) The periodic cleaning of this valve allows to improve the pollution, in fact the recirculation of the combustion gases (in the context of the alterna
Disassembly and cleaning of the EGR valve
Vauxhall Vectra (1995-2002 / MK 2, Vectra B) The function of the EGR (Exaust Gas Rcirculation) valve is to introduce part of the exhaust gases back into the intake so as to allow further combust
How to replace the particulate filter of the Opel Vectra
Vauxhall Vectra (2002-2008 / MK 3, Vectra C) We will see below the procedure and the instructions that will allow us to disassemble and replace the particulate filter of the Opel Vectra. First o

Other guides that may interest you

How do you reset the tire pressure light on the Toyota Aygo X?

To reset the tire pressure warning light on the Toyota Aygo X, you need to inflate the tires until they reach the recommended pressure value: this will be indicated on the sticker attached to the driver's side door pillar. Once the tires are inflated, you can go inside the cabin and turn on the instrument panel: after it has been turned on, you can open the glove box on the passenger side and locate the SET button that must be held down to turn off the warning light.

Watch the video!


by ScegliAuto

More videos