Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Throttle Body on an Opel Vectra

Model: Vauxhall Vectra Vectra B, MK 2 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Throttle body

See other generations:
Video tutorial

Start by depressurising the fuel system which contains fuel under pressure. After that, you can begin disassembly starting from the intake air hose.

To remove the throttle body, you will need to disconnect the electrical connector on the ECU cable, four pipes located on the side facing the cabin, taking care not to damage them during the process. Then, simply unscrew the four screws on the upper side that secure the entire body to the engine intake.

At this point, you can proceed with a thorough inspection and assess whether to replace or deeply clean the part.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on an Opel Vectra
How to Remove the Front Bumper on an Opel Vectra
Vauxhall Vectra (2002-2008 / Vectra C, MK 3) How to remove the door panel on an Opel Vectra? Lift the front bonnet and remove the central grille, then proceed to remove the bumper. Unscrew the f…
How to remove the rear seats of the Opel Vectra
How to remove the rear seats of the Opel Vectra
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) Today's main steps will show us how to disassemble the small sofa and the backrests of the rear seats of the Opel Vectra. First, we open the rear doo…
Dismantling and Cleaning the EGR Valve
Dismantling and Cleaning the EGR Valve
Vauxhall Vectra (1995-2002 / Vectra B, MK 2) The function of the EGR (Exhaust Gas Recirculation) valve is to reintroduce some exhaust gases into the intake to allow for further combustion and th…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos