|
Do it yourself
| |||
| ||||
How to clean the throttle body without removing it
Model: Vauxhall Astra
Astra J
- Years 2009-2016
Let's see how to clean the throttle body of an Opel Astra (specifically with LPG system) using a specific cleaning spray, such as Ambro-sol A469, which can be found on Amazon with the code B078Y2JXD1 for £11.49, without removing the component. First, warm up the engine for a few minutes, disconnect the air hose connecting to the throttle body, start the engine, and hold the accelerator pedal at about 1,500/2,000 RPM. Spray the product directly onto the throttle body for about 5 minutes, in intervals, ensuring the engine does not stall. Then turn off the engine and let it rest; repeat the operation. Reattach the hose and take a test drive for 20/30 minutes, revving the engine to expel dirt and residues through the exhaust. This cleaning should be done every 30,000 miles (or even 20,000 for those with LPG).
Posted on 5 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Astra
(2004-2010 /
Astra H)
This guide shows you how to remove the throttle body for cleaning or replacement on the Opel Astra, following these simple steps. First, open the bon…
Vauxhall Astra
(2004-2010 /
Astra H)
The following steps will guide you on how to remove and replace the throttle body on an Opel Astra, following the instructions below. First, open the…
Vauxhall Astra
(2004-2010 /
Astra H)
To carry out a thorough cleaning of the throttle body, you need to remove it: it is located at the front right of the engine (when viewed from the fr…
Other guides you may be interested in
|
How to Reset the Central Locking of the Volkswagen Golf 4?
If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.585
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |