Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Clean the Throttle Control System

Model: Vauxhall Astra Astra G - Years 1998-2006
Part: Throttle body

If there are fuel delivery issues with fluctuations in engine RPM, clean the throttle control system. You can clean the regulator without disassembling the entire unit by simply using a special spray, but complete disassembly ensures thorough cleaning. The first step is to loosen the air hose clamp and the fuel lines. Once the hoses are removed, you can observe the dirtiness of the regulator. After disassembling the complete body, use a brush and a tray with solvent to carry out a thorough cleaning. If the throttle is not touched, calibration is not necessary. Refit the hoses.

Updated on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove and Clean the Throttle Body on the Opel Astra
How to Remove and Clean the Throttle Body on the Opel Astra
Vauxhall Astra (2004-2010 / Astra H) This guide shows you how to remove the throttle body for cleaning or replacement on the Opel Astra, following these simple steps. First, open the bon…
How to clean the throttle body without removing it
How to clean the throttle body without removing it
Vauxhall Astra (2009-2016 / Astra J) Let's see how to clean the throttle body of an Opel Astra (specifically with LPG system) using a specific cleaning spray, such as Ambro-sol A469, whi…
How to Replace the Throttle Body on an Opel Astra 1.4
How to Replace the Throttle Body on an Opel Astra 1.4
Vauxhall Astra (2004-2010 / Astra H) The following steps will guide you on how to remove and replace the throttle body on an Opel Astra, following the instructions below. First, open the…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos