Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlamp Bulb on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
Video tutorial

To replace the headlamp bulb on an Opel Corsa model D, you need to remove the headlamp from its housing. To do this, unscrew the screws located on the wheel arch and then the screws on the top of the headlamp and the bottom of the bumper.

After removing the headlamp, open the cover and disconnect the connector to remove the bulb. Insert the new bulb, reconnect the connector, and close the cover.

Place the headlamp back into its housing and screw in the screws on the top and bottom of the bumper.


Updated on 21 October 2026 by ScegliAuto


Related tutorials

How to replace the front headlight bulb on an Opel Corsa D
How to replace the front headlight bulb on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) If you own an Opel Corsa D and need to replace one of the front headlight bulbs yourself, simply read the following guide carefully and apply all the…
How to Replace the Headlamp Bulb on the Opel Corsa E?
How to Replace the Headlamp Bulb on the Opel Corsa E?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the bulb on the Opel Corsa E, open the bonnet to access the internal part of the headlamp corresponding to the bulb to be replaced. Once t…
How to Remove the Right Front Headlamp Bulb of the 2011 Opel Corsa
How to Remove the Right Front Headlamp Bulb of the 2011 Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Replacing the right front headlamp bulb on a 2011 Opel Corsa D involves simple steps you can do yourself. First, open the bonnet. Second, disconnect …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos