Do it yourself
Frequently asked questions about cars and motorcycles

How do you repair the pipe that directs the exhaust fumes in the Opel Corsa C?

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Checks and maintenance

The pipe that directs the exhaust fumes from combustion in the Opel Corsa C could wear out over the years, get damaged and break, becoming very noisy. In the video posted here, it is explained how to solve this problem with a rather simple solution, namely replacing the rotten part of the exhaust with a flexible steel pipe. The process begins by removing the old pipe mentioned earlier, using a penetrating spray if necessary, cutting out the damaged part and welding the aforementioned flexible steel pipe to the healthy part. All that's left is to reassemble everything.

Posted on 24 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Corsa (2006-2014 / Corsa D) To change the engine oil on the Opel Corsa D, it is recommended to lift the car and remove the Torx 45 screw that secures the oil drain plug. Once th…
Vauxhall Corsa (2006-2014 / Corsa D) As shown in the video, the Opel Corsa D has an issue with the clutch pedal due to a leak in the hydraulic line connected to the clutch. First, open t…
Vauxhall Corsa (2000-2006 / Corsa C) Replacing the fuel filter on an Opel Corsa C is a straightforward task. After obtaining the replacement part, clean the surface of the filter, discon…

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos