|
Do it yourself
| |||
| ||||
How to remove the starter motor on an Opel/Vauxhall Astra MK-H MK-G
Model: Vauxhall Astra
Astra H
- Years 2004-2010
In this video we see how to remove the starter motor on an Opel Astra MKH or MKG; the first step is to remove the battery with its tray, which is held by two 13 mm bolts. Now we see another 18 mm bolt located under the cable protection sheath, which is quite difficult to see and reach, but we can do it with an extension. After that, we need to move under the car, where we find three connections that need to be removed: a 13 mm nut, then a black cable attached with a torx, and a red cable attached with a 13 mm bolt. We also need to remove the oil tubing located right in front of the starter motor. The youtuber replaced the very old starter motor with a used one: these parts are easily found online but it is impossible to give a purchasing indication for used ones. We recommend checking the part very carefully before purchasing it, so that it is perfectly compatible with our car.
Posted on 7 February 2025 by ScegliAuto
Video tutorial
Related tutorials
Vauxhall Astra
(2009-2016 /
Astra J)
In this short and simple guide, you will learn how to remove and replace the starter motor of the Opel Astra. First, raise the vehicle to access the …
Vauxhall Astra
(1998-2006 /
Astra G)
Today we are going to discover the instructions that will allow us to disassemble and replace the starter motor of the Opel Astra 1.7 DTI. First, we …
Vauxhall Astra
(1998-2006 /
Astra G)
Remove the starter motor if damaged. Open and lift the front bonnet, then disconnect the battery terminals. Remove the battery and its tray. Locate t…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Connect the Cables to the Battery of the Citroen Xsara Picasso?
In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.496
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |