Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear headlight bulb of the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Tail light bulb

If you own a first-generation Opel Mokka and want to learn how to properly and safely replace the rear headlight bulb, all you have to do is pay attention to the following procedure and then follow the steps. First, lift the rear hood of the car and remove the protective cover located on the side of the trunk. Once you have done this, disconnect the electrical cable and proceed to replace the faulty bulb with a new one of the same type. Finally, reconnect the electrical cable and reassemble the protective cover.

Posted on 2 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Opel Mokka
How to replace the rear headlight bulbs of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show us how to disassemble and replace the rear headlight bulbs of the Opel Mokka, following the instructions below. First, we ope…
How to Remove the Interior Light on an Opel Mokka
How to Remove the Interior Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) To replace the damaged bulb in the interior light of an Opel Mokka: use a screwdriver to pry between the interior light and the headlining panel (wit…
How to Remove the Number Plate Light of an Opel Mokka
How to Remove the Number Plate Light of an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Is replacing the number plate light of your Opel Mokka a complicated task? Let's see in this video how to replace the damaged bulb. Open the boot lid…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos