Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Headlamp Bulb on an Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tail light bulb

See other generations:
Video tutorial

Replacing the rear headlamp bulb on an Opel Mokka is very simple, as shown in the attached video guide. First, go to the boot and, depending on which side you need to work on, remove the side compartment door.

Once done, you will also need to remove the bottom of the same compartment. Now that you have access to the headlamp from the rear, locate the bulb in question; it is the one positioned at the top, which can be removed simply by pulling it out and turning it counter-clockwise.

The replacement bulb should be a W21/5W.


Updated on 25 April 2026 by ScegliAuto


Related tutorials

Vauxhall Mokka (2012-2019 / Mokka A) In this brief guide, we will go through the steps to remove and replace the rear light bulbs on the Opel Mokka. First, open the rear boot lid and sta…
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you how to remove and replace the rear light bulbs on an Opel Mokka, following the instructions below. First, open the boot l…
Vauxhall Mokka (2012-2019 / Mokka A) Are the rear headlamp lights on your Opel Mokka not working anymore? This video shows how to replace the rear headlamp bulbs. Open the boot lid, and …

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos