Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear turn signal bulb of the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Side marker light

Replacing the turn signal bulbs of the rear lights of a 2017 Opel Mokka vehicle is a simple and quick operation to be carried out independently. To perform this operation, we need to open the trunk of the car and with the help of a flat-head screwdriver remove the side covers of the trunk, in this way we will have access to the inside of the rear lights. Disconnect the connector from the bulb and proceed with the replacement. Mount the cover and proceed in the same way with the turn signal bulb of the left headlight. If the headlight still has malfunctions and the connector is in good condition, the cause must be sought in the fuse related to it.

Posted on 10 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the high beam bulb of the Opel Mokka 2014
How to replace the high beam bulb of the Opel Mokka 2014
Vauxhall Mokka (2012-2019 / Mokka A) If you are planning to replace the high beam bulb of your Opel Mokka first edition (year 2014), but you do not know how to perform the operation in q…
How to replace the dipped beam bulb on Opel Mokka MK1
How to replace the dipped beam bulb on Opel Mokka MK1
Vauxhall Mokka (2012-2019 / Mokka A) In this video, we will see how to replace the low beam headlight bulb on an Opel Mokka MK1: we open the front hood; we have enough space to reach beh…
Replacement of the front headlight bulb of the Opel Mokka
Replacement of the front headlight bulb of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's instructions will show us how to disassemble and replace the headlight bulb of the Opel Mokka, in simple steps. First, we open the hood and s…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos