Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Fog Light of a 2018 Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fog lights

See other generations:
Video tutorial

If one of the rear fog lights on your first series Opel Mokka (2018) has suddenly stopped working, follow these steps to replace the bulb in just a few minutes. After turning off the vehicle, go to the rear and bend down to reach the lower area of the bumper.

At this point, disconnect the electrical cable connected to the fog light and remove the bulb holder. Finally, replace the faulty bulb with a new compatible one and reassemble the various components correctly.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Replace the Fog Light on the 2018 Opel Mokka X
How to Replace the Fog Light on the 2018 Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) In this guide, you will discover how to correctly replace the small fog light on your 2018 Opel Mokka X. First, park the vehicle on a flat surface, t…
How to replace the fog light bulbs in the Opel Mokka?
How to replace the fog light bulbs in the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) In this tutorial we can see how to replace the fog light bulbs in the Opel Mokka, an extremely simple and quick operation. First of all, make sure th…
How to Replace the Rear Light Bulbs on an Opel Mokka
How to Replace the Rear Light Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you how to remove and replace the rear light bulbs on an Opel Mokka, following the instructions below. First, open the boot l…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos