Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fog Light on the 2018 Opel Mokka X

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fog lights

See other generations:
Video tutorial

In this guide, you will discover how to correctly replace the small fog light on your 2018 Opel Mokka X. First, park the vehicle on a flat surface, then go outside and reach the lower area of the front bumper. Locate the fog light bulb holder and disconnect the electrical cable.

Once done, remove the faulty bulb and replace it with a new compatible one. Reconnect the previously disconnected cable, and the procedure is complete.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Fog Light of a 2018 Opel Mokka
How to Replace the Rear Fog Light of a 2018 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) If one of the rear fog lights on your first series Opel Mokka (2018) has suddenly stopped working, follow these steps to replace the bulb in just a f…
How to Replace the Front Headlight Bulbs on an Opel Mokka
How to Replace the Front Headlight Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboar…
How to Replace the Rear Light Bulbs on an Opel Mokka
How to Replace the Rear Light Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's guide will show you how to remove and replace the rear light bulbs on an Opel Mokka, following the instructions below. First, open the boot l…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos