Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the front bumper of the Opel Mokka?

Model: Vauxhall Mokka Mokka B - Years 2020-2026
Part: Front bumper

Let's go see how to disassemble, step by step, the front bumper of the Opel Mokka, in the video available to us. For the convenience of the person performing the work, the car has been lifted, so the front wheels have been removed, the wheel arches have been disassembled, and the rear bumper pins have been unscrewed. The next step was to remove the pins of the front grille, the fasteners at the bottom and top, and finally, completely freed, it was pulled away from the body. Finally, the actual conclusion of the work is given by the rear pin of the cables, which must be disconnected.

Posted on 2 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on the Opel Mokka
How to Replace the Timing Belt on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) To replace the timing belt on the Opel Mokka, you need to completely remove the front bumper and the wing corresponding to the right front headlamp: …
How to Reset the "Service" Light on an Opel Mokka
How to Reset the "Service" Light on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, sit in the driver's seat of your Opel Mokka. Start by activating the instrument cluster by turning the key to position one. Next, p…
What Does the "MIL" Light Mean on an Opel Mokka?
What Does the "MIL" Light Mean on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) When the "MIL" (Malfunction Indicator Lamp) light activates on the dashboard of your Opel Mokka, it indicates a general malfunction with the emission…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos