Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Bumper of the Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Rear bumper

See other generations:
Video tutorial

To remove the rear bumper of the Opel Mokka, start by heating the trim on the wheel arch with a heat gun. Using a forked lever padded with tape to avoid scratching the bodywork, use a release spray to detach it from its housing. Unscrew the screws inside the wheel arch, and using the forked lever, detach the pressure pins on the lower edge of the bumper.

Once at the opposite wheel arch, repeat the initial steps on this side as well. You can then detach the entire bumper and remove it completely after disconnecting the electrical connector.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Replacing the Rear Light and Bulbs on the Opel Mokka
Replacing the Rear Light and Bulbs on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today's instructions will show you how to remove and replace the rear light and its bulbs on the Opel Mokka. First, open the boot lid and start remov…
How to Replace the Rear Wiper on the Opel Mokka
How to Replace the Rear Wiper on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Briefly, here are the instructions to remove and replace the rear wiper on the Opel Mokka. First, move to the rear of the vehicle and start by removi…
How to Replace the Key Battery on an Opel Mokka
How to Replace the Key Battery on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Start by pressing the button located on the back of your Opel Mokka's key fob. Next, extract the physical emergency key and use a flathead screwdrive…

Other guides you may be interested in

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos