Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Mokka
    4. : Rear bumper

Vauxhall Mokka - Rear bumper

Rear Bumper Vauxhall Mokka (2012-2019 / mokka a)

Vauxhall Mokka (2012-2019 / Mokkaa)
Removing the Rear Bumper of the Opel Mokka
To remove the rear bumper of the Opel Mokka, start by heating the trim on the wheel arch with a heat gun. Using a forked lever padded with tape to avoid …Read all…
Posted on 9 October 2026 by ScegliAuto
Vauxhall Mokka (2012-2019 / Mokkaa)
How to Remove the Rear Bumper of the Opel Mokka?
To remove the rear bumper of the Opel Mokka, loosen all the bolts located inside the wheel arches and at the bottom of the bumper, as shown in the video. Next, …Read all…
Posted on 3 June 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Antenna (1) Car stereo (9) Battery (4) Transmission (1) Spark plugs (3) Glow plugs (1) Body (5) Key (21) Timing belt (16) V-belt (1) Onboard computer (9) Checks and maintenance (33) Dashboard (3) Brake rotors (2) Side marker light (3) Headlight (2) Tail light (2) Fog lights (4) Air filter (13) Cabin air filter (28) Fuel filter (1) Diesel fuel filter (6) Oil filter (6) Parking brake (13) Accessory kit (1) Light bulb (5) Side marker bulb (1) Headlight bulb (17) Tail light bulb (9) Interior dome light bulb (1) Antifreeze coolant (1) Instrument panel light (1) License plate light (2) Handle (1) Engine (2) Engine oil (8) Clock (13) Door trim panel (3) Front bumper (1) Rear bumper (2) Brake pads (6) Tires (1) Shift knob (2) Pump (2) Car door (1) Push button (1) Instrument cluster (3) Wheel (1) Fuse box (23) Seat (6) Engine coolant temperature sensor (1) Brake system (1) Warning light – error code (18) Tire pressure warning light (48) Service warning light (90) Fuel cap (2) Windshield wipers (10) Thermostat (1) EGR valve (3) Side window (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos