Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Mokka
    4. : Side window

Vauxhall Mokka - Side window

Side Window Vauxhall Mokka (2012-2019 / mokka a)

Vauxhall Mokka (2012-2019 / Mokkaa)
Where Are the Rear Window Regulator Fuses Located on an Opel Mokka X?
If the rear window regulators on your Opel Mokka have suddenly stopped working, the first thing to do is check the status of the relevant fuse, the location of …Read all…
Posted on 28 August 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Antenna (1) Car stereo (8) Battery (4) Transmission (1) Spark plugs (3) Glow plugs (1) Body (5) Key (20) Timing belt (16) V-belt (1) Onboard computer (9) Checks and maintenance (32) Dashboard (3) Brake rotors (2) Side marker light (3) Headlight (2) Tail light (2) Fog lights (4) Air filter (13) Cabin air filter (28) Fuel filter (1) Diesel fuel filter (6) Oil filter (6) Parking brake (13) Accessory kit (1) Light bulb (5) Side marker bulb (1) Headlight bulb (17) Tail light bulb (9) Interior dome light bulb (1) Antifreeze coolant (1) Instrument panel light (1) License plate light (2) Handle (1) Engine (2) Engine oil (8) Clock (13) Door trim panel (3) Front bumper (1) Rear bumper (2) Brake pads (6) Tires (1) Shift knob (2) Pump (2) Car door (1) Push button (1) Instrument cluster (3) Wheel (1) Fuse box (23) Seat (6) Engine coolant temperature sensor (1) Brake system (1) Warning light – error code (18) (36) Tire pressure warning light (11) Service warning light (90) Fuel cap (2) Windshield wipers (10) Thermostat (1) EGR valve (3) Side window (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos