Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Mokka
    4. : Spark plugs

Vauxhall Mokka - Spark plugs

Spark Plugs Vauxhall Mokka (2012-2019 / mokka a)

Vauxhall Mokka (2012-2019 / Mokkaa)
How to Replace the Spark Plugs on an Opel Mokka
To change the spark plugs on your Opel Mokka, you will need a 16 mm spanner, a screwdriver, and a 30 mm Torx. The cost of a kit of 4 spark plugs varies from …Read all…
Posted on 21 July 2026 by ScegliAuto
Vauxhall Mokka (2012-2019 / Mokkaa)
Spark Plug Replacement on Opel Mokka
Open the bonnet and place the support prop in position. Remove the engine cover. Disconnect the connector plugged into the side of the spark plug housing, and …Read all…
Posted on 4 May 2026 by ScegliAuto
Vauxhall Mokka (2012-2019 / Mokkaa)
Removing the Spark Plugs on Opel Mokka
Want to remove the spark plugs on Opel Mokka? Here’s how to do it. Pull the lever to open the engine compartment and lift the front bonnet, securing it. …Read all…
Posted on 27 March 2026 by ScegliAuto
Cigarette lighter (1) Airbag (4) Antenna (1) Car stereo (9) Battery (4) Transmission (1) Spark plugs (3) Glow plugs (1) Body (5) Key (21) Timing belt (16) V-belt (1) Onboard computer (9) Checks and maintenance (33) Dashboard (3) Brake rotors (2) Side marker light (3) Headlight (2) Tail light (2) Fog lights (4) Air filter (13) Cabin air filter (28) Fuel filter (1) Diesel fuel filter (6) Oil filter (6) Parking brake (13) Accessory kit (1) Light bulb (5) Side marker bulb (1) Headlight bulb (17) Tail light bulb (9) Interior dome light bulb (1) Antifreeze coolant (1) Instrument panel light (1) License plate light (2) Handle (1) Engine (2) Engine oil (8) Clock (13) Door trim panel (3) Front bumper (1) Rear bumper (2) Brake pads (6) Tires (1) Shift knob (2) Pump (2) Car door (1) Push button (1) Instrument cluster (3) Wheel (1) Fuse box (23) Seat (6) Engine coolant temperature sensor (1) Brake system (1) Warning light – error code (18) Tire pressure warning light (48) Service warning light (90) Fuel cap (2) Windshield wipers (10) Thermostat (1) EGR valve (3) Side window (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos