Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Spark Plugs on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Spark plugs

See other generations:
Video tutorial

To change the spark plugs on your Opel Mokka, you will need a 16 mm spanner, a screwdriver, and a 30 mm Torx. The cost of a kit of 4 spark plugs varies from £10.00 to £29.00, depending on the brand, on major e-commerce platforms. First, remove the engine cover, and you will immediately find the ignition coil; disconnect the connector.

Remove the coil, then take out the spark plugs, ensuring no dirt falls into their housing, and proceed with the replacement of the spark plugs. Be very careful when placing them, as if they fall, retrieving them is quite difficult.

Now, reconnect the coil, the connector, the engine cover, and the job is done.


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Removing the Spark Plugs on Opel Mokka
Removing the Spark Plugs on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Want to remove the spark plugs on Opel Mokka? Here’s how to do it. Pull the lever to open the engine compartment and lift the front bonnet, securing …
Spark Plug Replacement on Opel Mokka
Spark Plug Replacement on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Open the bonnet and place the support prop in position. Remove the engine cover. Disconnect the connector plugged into the side of the spark plug hou…
How to Replace the Glow Plugs on an Opel Mokka
How to Replace the Glow Plugs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, open the bonnet of your Opel Mokka. Start by unclipping and removing the upper engine cover. Then, disconnect the hoses connected t…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos