Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Glow Plugs on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Checks and maintenance

Before you begin, open the bonnet of your Opel Mokka. Start by unclipping and removing the upper engine cover. Then, disconnect the hoses connected to the glow plugs, followed by disconnecting the positive electrical connectors. This will give you access to the glow plug heads. Next, unscrew and remove the glow plugs from the cylinder head, completing the disassembly. To fit the new glow plugs, repeat these instructions in reverse, and the replacement will be correctly completed.

Updated on 20 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Mokka (2012-2019 / Mokka A) Today, you will see the main instructions that will allow you to remove and replace the engine's glow plugs on the Opel Mokka 1.7 CDTI. First, open t…
Vauxhall Mokka (2012-2019 / Mokka A) To change the spark plugs on your Opel Mokka, you will need a 16 mm spanner, a screwdriver, and a 30 mm Torx. The cost of a kit of 4 spark plugs vari…
Vauxhall Mokka (2012-2019 / Mokka A) Want to remove the spark plugs on Opel Mokka? Here’s how to do it. Pull the lever to open the engine compartment and lift the front bonnet, securing …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos