Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glow Plugs on an Opel Zafira 2.0 CDTi

Model: Vauxhall Zafira Zafira C, MK 3 - Years 2011-2019
Part: Glow plugs

This guide shows the steps to remove and replace the glow plugs on an Opel Zafira 2.0 CDTi. First, open the bonnet and start by removing the upper plastic cover; then remove the panel located under the wipers to access the rear of the engine block and the glow plugs, as shown in the video. At this point, disconnect the connectors of the glow plugs using a socket wrench with an extension to unscrew and remove them; replace the glow plugs with new original ones.

Posted on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on an Opel Zafira 2.2 CDTi
How to Replace the Fuel Pump on an Opel Zafira 2.2 CDTi
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) In this guide, we will see the instructions on how to remove and replace the fuel pump on an Opel Zafira 2.2 CDTi, as well as on the Opel Meriva. Fir…
Removing Turbocharger from Opel Zafira CDTI Diesel
Removing Turbocharger from Opel Zafira CDTI Diesel
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) In this video tutorial, you will see the main steps to remove the turbocharger from an Opel Zafira CDTi Diesel. First, open and lift the bonnet: remo…
How to Remove the Alternator on Opel Zafira B 1.9 CDTI
How to Remove the Alternator on Opel Zafira B 1.9 CDTI
Vauxhall Zafira (2005-2011 / Zafira B, A05, MK 2) In this video tutorial, you will learn how to remove the alternator on the Opel Zafira B 1.9 CDTI by following the instructions below. First, lift th…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos