Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Spark Plugs on Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Spark plugs

See other generations:
Video tutorial

Want to remove the spark plugs on Opel Mokka? Here’s how to do it. Pull the lever to open the engine compartment and lift the front bonnet, securing it. Remove the soundproofing panel covering the engine, then unscrew the pins on the coil bar with a screwdriver.

Remove the coil bar after disconnecting the power terminals; use a socket to unscrew the spark plugs and pull them out of the cylinder head.

Take the new spark plugs and guide them into the cylinder head with the extension of the socket. Tighten them and reconnect the respective power terminals.

Close the engine compartment after maintenance.


Updated on 8 March 2026 by ScegliAuto


Related tutorials

How to Replace the Spark Plugs on an Opel Mokka
How to Replace the Spark Plugs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) To change the spark plugs on your Opel Mokka, you will need a 16 mm spanner, a screwdriver, and a 30 mm Torx. The cost of a kit of 4 spark plugs vari…
Spark Plug Replacement on Opel Mokka
Spark Plug Replacement on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Open the bonnet and place the support prop in position. Remove the engine cover. Disconnect the connector plugged into the side of the spark plug hou…
How to replace the front wipers on the Opel Mokka X
How to replace the front wipers on the Opel Mokka X
Vauxhall Mokka (2012-2019 / Mokka A) In this video tutorial, see how to remove and replace the front wipers, as well as the rear one, on the Opel Mokka and Mokka X, following these simpl…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos