Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Spark Plug Replacement on Opel Mokka

Model: Vauxhall Mokka Mokka A - Years 2012-2019
Part: Spark plugs

Open the bonnet and place the support prop in position. Remove the engine cover. Disconnect the connector plugged into the side of the spark plug housing, and unscrew the support bracket located above it. Using the appropriate socket, unscrew the spark plugs and, when finished, extract them from their seats using the socket. Insert the new spark plugs and screw them in, ensuring they are tightened properly. Refit the upper support bracket and reconnect the connector. Refit the engine cover and close the bonnet. Check the correct ignition of the car.

Updated on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glow Plugs on an Opel Mokka
How to Replace the Glow Plugs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Before you begin, open the bonnet of your Opel Mokka. Start by unclipping and removing the upper engine cover. Then, disconnect the hoses connected t…
How to Replace the Spark Plugs on an Opel Mokka
How to Replace the Spark Plugs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) To change the spark plugs on your Opel Mokka, you will need a 16 mm spanner, a screwdriver, and a 30 mm Torx. The cost of a kit of 4 spark plugs vari…
Removing the Spark Plugs on Opel Mokka
Removing the Spark Plugs on Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Want to remove the spark plugs on Opel Mokka? Here’s how to do it. Pull the lever to open the engine compartment and lift the front bonnet, securing …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos