Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Side Steps on the Opel Mokka MK2

Model: Vauxhall Mokka Mokka B - Years 2020-2026
Part: Body

In this video, you can see how to install side steps on the Opel Mokka MK2: The side steps shown in this video can be found on bamboliltd.com with the code 38082753757344_24B1 and cost £347.65: shipping is indicated as included, but we believe it refers to the USA; we have not found any further information. Once the vehicle is lifted, remove the rubber protections and apply the appropriate screws in their place where you can insert the brackets that must also be secured horizontally. Once the brackets are attached, you can place the side steps on top, resting the bolts in their respective housings and tightening them well from underneath.

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to install a Dash Cam on the Opel Mokka
How to install a Dash Cam on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let's see how to install a Dash Cam on the Opel Mokka: the Dash cam we have is front and rear. We can find it, for example, on autoelite.it/btv-ae-10…
How to install an LED indicating that the DPF is regenerating on an Opel Mokka
How to install an LED indicating that the DPF is regenerating on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) In this video we see how to install a LED inside the cabin of the Opel Mokka, which can indicate when the car is performing a DPF regeneration. Two w…
How to reset the Opel Mokka to factory settings
How to reset the Opel Mokka to factory settings
Vauxhall Mokka (2012-2019 / Mokka A) If the infotainment system of your first series Opel Mokka presents anomalies at the software level, do not worry because in the following guide we w…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos