Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Damaged Wheel on an Opel Mokka

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Wheel

See other generations:
Video tutorial

How to replace a damaged wheel on an Opel Mokka? Open the boot and take the wheel removal kit which includes: jack, lever, screwdriver, wheel nut key (if present), telescopic wrench, spare wheel. Position the jack under the jacking point of the car (under the stiffest part of the chassis), lift the car slightly and loosen the wheel nuts.

Raise the car with the jack, unscrew the nuts and pull the wheel off the hub. Fit the spare wheel onto the hub with the respective nuts and lower the car. Always remember to store the removal kit with all its parts in the boot.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on an Opel Mokka
How to Replace the Front Headlight Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Let’s see how to replace the front headlight bulbs on an Opel Mokka. Open the bonnet by pulling the lever located at the bottom right of the dashboar…
How to Remove the Front Headlamp Bulbs on an Opel Mokka
How to Remove the Front Headlamp Bulbs on an Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Here’s how to remove and replace the front headlamp bulbs on an Opel Mokka: open the front bonnet by pulling the lever located at the bottom right of…
Replacing the Front Brake Pads on the Opel Mokka
Replacing the Front Brake Pads on the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Briefly see how to remove and replace the front brake pads on the first series Opel Mokka in simple, quick steps. First, lift the vehicle and remove …

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos