Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the fog light bulbs in the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Fog lights

See other generations:
Video tutorial

In this tutorial we can see how to replace the fog light bulbs in the Opel Mokka, an extremely simple and quick operation. First of all, make sure that the key is not inserted, then position yourself on the side where you will be working and, using a Torx key, unscrew the fixing screws of the internal cover of the wheel arch.

Continue by unscrewing the lower screws with a screwdriver with a cross tip, separate the cover itself from the bumper and remove the old bulb by rotating it counterclockwise. At this point, all that remains is to disconnect the connector, install the replacement and reassemble everything following the reverse procedure.


Posted on 18 November 2025 by ScegliAuto


Related tutorials

How to replace the front headlight bulbs on the Opel Mokka X?
How to replace the front headlight bulbs on the Opel Mokka X?
Vauxhall Mokka (2012-2019 / Mokka A) In this tutorial, you will learn how to replace the front headlight bulbs on the Opel Mokka X, a very simple and quick operation. First, ensure the k…
How to Replace the Rear Fog Light of a 2018 Opel Mokka
How to Replace the Rear Fog Light of a 2018 Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) If one of the rear fog lights on your first series Opel Mokka (2018) has suddenly stopped working, follow these steps to replace the bulb in just a f…
How to Replace the Rear Light Bulbs on an Opel Mokka?
How to Replace the Rear Light Bulbs on an Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) In this tutorial, we will see how to replace the rear light bulbs on an Opel Mokka, a very simple and quick operation. First, ensure that the key is …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos