Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Windscreen Wiper Nozzles on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Windshield washer nozzle

In this video, learn how to remove the windscreen wiper nozzles on an Opel Corsa: pull the plastic lever located at the bottom left of the dashboard, lift the bonnet and secure it. Remove the grille under the windscreen, then use a socket to detach the wiper arm brackets. Remove the plastic cover with the appropriate locking screws and disconnect the tubes from the wiper nozzles. Detach the nozzles from the water circulation tubes and connect the new parts. Reassemble everything in reverse order.

Updated on 4 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Windscreen Washer Jets on an Opel Corsa?
How to Replace the Windscreen Washer Jets on an Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the windscreen washer jets on an Opel Corsa, open the bonnet to remove the seal located at the base of the windscreen. Underneath, you wil…
How to Remove the Injectors from the Opel Corsa 1.3 CDTi
How to Remove the Injectors from the Opel Corsa 1.3 CDTi
Vauxhall Corsa (2006-2014 / Corsa D) These simple steps will show you how to remove and replace the injectors of the Opel Corsa 1.3 CDTi, following the instructions below. First, open th…
How do you replace the injectors of the Opel Corsa?
How do you replace the injectors of the Opel Corsa?
Vauxhall Corsa (2000-2006 / Corsa C) In order to replace the injectors of the Opel Corsa, you need to open the hood so that you can access the internal components of the engine compartme…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos