Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear bumper of the Opel Crossland?

Model: Vauxhall Crossland X MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Rear bumper

Video tutorial

Whether it is repainting, replacement due to damage from a road accident, or because you want to change the appearance of the car with an aftermarket bumper, it is not necessary to go to the body shop, with a little skill it can also be done independently.

The main steps are removing the wheel arches, necessary to remove the rear pins of the bumper, then the pins housed in the lower part, and finally the fixing screws of the upper area.

Now, grabbing it, if all the aforementioned screws have been removed, we will pull it to remove it from the remaining bodywork.


Posted on 7 June 2025 by ScegliAuto


Related tutorials

How to Recline the Rear Seats of the Opel Crossland X
How to Recline the Rear Seats of the Opel Crossland X
Vauxhall Crossland X (2017-2024 / MK 1) This video demonstrates some simple features of the new Opel Crossland X, a compact MPV from the German manufacturer. It illustrates all the new solu…
How to Replace the Rear Wiper Blade on an Opel Crossland X?
How to Replace the Rear Wiper Blade on an Opel Crossland X?
Vauxhall Crossland X (2017-2024 / MK 1) To replace the rear wiper blade on an Opel Crossland X, lift the plastic cover at the base of the wiper arm: underneath, you will find the nut that s…
Where to Find the OBD Port on an Opel Crossland
Where to Find the OBD Port on an Opel Crossland
Vauxhall Crossland X (2017-2024 / MK 1) In this brief guide, you will find out how to locate the OBD port inside the cabin of your Opel Crossland in just a few seconds. First, get in the ca…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos