Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the battery of the Opel Corsa remote control

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Key

See other generations:
Video tutorial

Today we will explain how to replace the battery of the Opel Corsa remote control. To replace the battery, we need to use a flat-head screwdriver; we insert the flat-head screwdriver into the corner of the remote control to remove the cover.

After removing the cover of the remote control, we remove the battery and insert the new 3V CR 20 32 model battery. The reason why a remote control battery drains quickly is mainly due to the fact that nowadays car remotes are not only used to open and close the vehicle, but also to start it.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

Vauxhall Corsa (2000-2006 / Corsa C) In a few simple steps, we will see how to disassemble and replace the battery of the key remote for the Opel Corsa. First, take the remote in your ha…
Vauxhall Corsa (2014-2019 / Corsa E) Replacing the remote control battery of the Opel Corsa model E produced from 2014 to 2019 is a simple and quick operation to be carried out independe…
Vauxhall Corsa (2006-2014 / Corsa D) To replace the remote battery on the Opel Corsa, use an object to pry open the lower section of the device, allowing the two halves of the shell to s…

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos