Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fan Resistor on an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Blower motor

See other generations:
Video tutorial

How to replace the fan resistor on an Opel Corsa. Start by removing the plastics under the glove compartment of the dashboard using a lever; unscrew the cover where the resistor is located with a screwdriver.

Disconnect the large connector from the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector).

Finally, refit the cover (glove compartment) and tighten the screws. Check the correct positioning of previously mounted parts and test their operation.


Updated on 5 March 2026 by ScegliAuto


Related tutorials

How to Replace the Radiator Fan Resistor on an Opel Corsa
How to Replace the Radiator Fan Resistor on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you can start, open the bonnet of your Opel Corsa. The fan resistor is located beneath the coolant expansion tank. Begin by disconnecting the …
How to Replace the Cabin Fan Resistor on the Opel Corsa D?
How to Replace the Cabin Fan Resistor on the Opel Corsa D?
Vauxhall Corsa (2006-2014 / Corsa D) To replace the cabin fan resistor on the Opel Corsa D, you need to remove the plastic cover located under the glove compartment on the passenger side…
How to Replace the Heating Resistor of an Opel Corsa?
How to Replace the Heating Resistor of an Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) Before you begin, sit in the front passenger seat of your Opel Corsa. The heating resistor is located under the glove compartment. Start by disconnec…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos