Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Resistor of an Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Heater control valve

Before you begin, sit in the front passenger seat of your Opel Corsa. The heating resistor is located under the glove compartment. Start by disconnecting the resistor connector by simply pulling it towards you. Next, unscrew and remove the two small bolts that secure the resistor. Once you have removed these two bolts, the resistor will be free. At this point, to remove it, simply pull it out, and you will have completed the disassembly. To fit the new resistor, repeat these steps in reverse, and the replacement will be complete.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Heating Resistor of an Opel Corsa
How to Replace the Heating Resistor of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The heating resistor for the cabin is located at the back of the glove compartment. To begin, sit in the front passenger seat of your Opel Corsa. Sta…
How to Replace the Heating Resistor in an Opel Corsa
How to Replace the Heating Resistor in an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Before you begin, sit in the front passenger seat of your Opel Corsa. The heating resistor is located at the bottom, beneath the glove compartment. S…
How to Replace the Heating Resistor of an Opel Corsa
How to Replace the Heating Resistor of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To replace the heating resistor of an Opel Corsa, access the vehicle from the passenger side. Remove the lower panel under the glove compartment by u…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos