Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Resistor in an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Heater control valve

See other generations:
Video tutorial

Before you begin, sit in the front passenger seat of your Opel Corsa. The heating resistor is located at the bottom, beneath the glove compartment.

Start by disconnecting the resistor plug by simply pulling it out. Next, unscrew the two small bolts that secure the resistor. Once you have unscrewed these two bolts, the resistor will be free.

At this point, to remove it, simply pull it out, and you will have completed the disassembly. To install the new resistor, repeat these few instructions in reverse, and you will have completed the replacement.


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Replace the Heating Resistor of an Opel Corsa
How to Replace the Heating Resistor of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The heating resistor for the cabin is located at the back of the glove compartment. To begin, sit in the front passenger seat of your Opel Corsa. Sta…
How to Replace the Heating Resistor of an Opel Corsa?
How to Replace the Heating Resistor of an Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) Before you begin, sit in the front passenger seat of your Opel Corsa. The heating resistor is located under the glove compartment. Start by disconnec…
How to Replace the Heating Resistor of an Opel Corsa
How to Replace the Heating Resistor of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) To replace the heating resistor of an Opel Corsa, access the vehicle from the passenger side. Remove the lower panel under the glove compartment by u…

How to Set the Time in an Audi A4?

In this tutorial, you will see how to set the time in an Audi A4, a very simple and quick operation to perform after replacing the battery or when the time changes. First, insert the key and turn on the instrument cluster. Then, press the "SETUP" button located on the center console. Next, press the upper left arrow button, navigate to the "Time" option, and use the central knob to adjust the clock. Finally, set any necessary formats and save by returning to the main screen.

Watch the video!


by ScegliAuto

More videos