Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heating Resistor of an Opel Corsa

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Checks and maintenance

See other generations:
Video tutorial

To replace the heating resistor of an Opel Corsa, access the vehicle from the passenger side. Remove the lower panel under the glove compartment by unscrewing the Torx screws and releasing the clips.

Locate the cabin fan housing: the resistor is inserted into the air duct, secured with screws. Disconnect the electrical connector by pressing the locking tab. Unscrew the securing screws and pull the resistor from its housing.

Insert the new component in the same position, screw in the screws, and reconnect the connector. Reassemble the lower panel and check the correct operation of the fan speeds.


Posted on 9 February 2026 by ScegliAuto


Related tutorials

Why is the heating system of the Opel Corsa D not working?
Why is the heating system of the Opel Corsa D not working?
Vauxhall Corsa (2006-2014 / Corsa D) When the heating system of the 2009 Opel Corsa D is not working, the cause is almost always related to a faulty heating relay. In such cases, replaci…
Replacement of the Opel Corsa's cabin heating radiator
Vauxhall Corsa (2000-2006 / Corsa C) Today's main steps will show us how to disassemble and replace the heater radiator of the Opel Corsa. First, we open the car's hood and start disconn…
How to Replace the Heater Radiator on an Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video, we will discover the steps to dismantle and replace the internal heater radiator on the Opel Corsa D. First, get inside the vehicle an…

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos