Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Heater Radiator on an Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Heater core

In this video, we will discover the steps to dismantle and replace the internal heater radiator on the Opel Corsa D. First, get inside the vehicle and start by removing the plastic panel located at the bottom on the passenger side; the radiator is located just behind it, as shown in the video. Next, open the bonnet and disconnect the heating circuit pipes, allowing the fluid to drain; then disconnect the clips from the aluminium pipes to remove them. Finally, remove and replace the radiator!

Updated on 30 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Replacement of the Opel Corsa's cabin heating radiator
Replacement of the Opel Corsa's cabin heating radiator
Vauxhall Corsa (2000-2006 / Corsa C) Today's main steps will show us how to disassemble and replace the heater radiator of the Opel Corsa. First, we open the car's hood and start disconn…
Guide to Replacing the Cabin Heater Radiator on the Opel Corsa
Guide to Replacing the Cabin Heater Radiator on the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Below are the instructions that will allow you to replace the coolant in the Opel Corsa. First, open the bonnet of the vehicle and start disconnectin…
Replacing the Heater Radiator on an Opel Corsa
Vauxhall Corsa (1993-2000 / Corsa B) Replace the heater radiator if warm air no longer works, here's how. Remove the plastic covers from the central tunnel (near the pedals). Unscrew the…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos