Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why is the heating system of the Opel Corsa D not working?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Fuse box

When the heating system of the 2009 Opel Corsa D is not working, the cause is almost always related to a faulty heating relay. In such cases, replacing it will resolve the fault. To replace the relay, open the bonnet and then the fuse box located near the battery. Once the box is open, use pliers to remove relay number 8 and insert a new relay of the same amperage in its place. Close the fuse box and the bonnet before turning on the heating system; if the problem persists, the cause may be the fan connector.

Updated on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Why Doesn't the Heating System in the Opel Corsa Model D Work?
Why Doesn't the Heating System in the Opel Corsa Model D Work?
Vauxhall Corsa (2006-2014 / Corsa D) When the heating system stops working in a 2009 Opel Corsa model D, the cause is likely the corresponding relay that has failed. This relay is locate…
Removing the Heating Radiator from the Opel Corsa
Removing the Heating Radiator from the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Follow the procedure to remove and replace the heating radiator in the Opel Corsa. First, open the bonnet of your car and disconnect the radiator flu…
How to Replace the Heating Resistor of an Opel Corsa
How to Replace the Heating Resistor of an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) The heating resistor for the cabin is located at the back of the glove compartment. To begin, sit in the front passenger seat of your Opel Corsa. Sta…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Fuse location on Opel Corsa? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos