Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Why Doesn't the Heating System in the Opel Corsa Model D Work?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Fuse box

When the heating system stops working in a 2009 Opel Corsa model D, the cause is likely the corresponding relay that has failed. This relay is located inside the fuse box under the front bonnet, specifically to the left of the battery. To access the box, remove the cover. The relay in question is numbered 48, blue, and rated at 20 Amperes. Replace it by removing the old relay and inserting a new 20 Ampere relay.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

The reason why the reverse gear won't engage in an Opel Corsa
The reason why the reverse gear won't engage in an Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) In this video, we see why the reverse gear won't engage in an Opel Corsa. Simply remove the gear knob and observe that all gears engage except for re…
Opel Corsa B Heating Not Working Due to Blocked Heater Matrix
Opel Corsa B Heating Not Working Due to Blocked Heater Matrix
Vauxhall Corsa (1993-2000 / Corsa B) In this video, you will see the cause of the heating failure in this Opel Corsa B; the heater matrix is blocked, resulting in only cold air coming ou…
Why is the heating system of the Opel Corsa D not working?
Why is the heating system of the Opel Corsa D not working?
Vauxhall Corsa (2006-2014 / Corsa D) When the heating system of the 2009 Opel Corsa D is not working, the cause is almost always related to a faulty heating relay. In such cases, replaci…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 2006-2014 - Fuse location on Opel Corsa? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos